Sunday, November 21, 2010

How to change a serpentine belt in a 1999 chevey malibu?

Look at the diagram under the hood for the correct routing of the belt. The way to remove the old one and install the new one is to relieve the pressure of the idler pulley. There will be a hex head in the center. More than likely a 14mm. or a square where a 3/8 ratchet can be inserted. Push down on the wrench or ratchet and this will relieve the tension and allow you to slip the belt off and the new one on.How to change a serpentine belt in a 1999 chevey malibu?
look at the diagram under the hood if u need more ask meHow to change a serpentine belt in a 1999 chevey malibu?
Be aware that it may be necessary to unbolt an engine mount to fully remove the belt. This is a the case on a different fwd GM car I own. You will need a jack to support the engine.
  • from eyebrow waxing
  • how to make out with your boyfriend
  •