Wednesday, November 24, 2010

2000 chrysler concorde 2.7L serpentine belt?

I am changing a serpentine belt on a 2000 Chrysler Concorde. I have the AC belt on I cant find out how to get the front MAIN belt on does anyone know if that idler pulley moves? I cant see any slots where it would slide. and there is no spring loaded pulley. Anything is appreciated2000 chrysler concorde 2.7L serpentine belt?
If I remember correctly, the idler does move but you access the adjuster bolt from underneath the car? Loosen the center nut on the pulley, then turn the adjuster bolt to move the pulley. Put the belt on, then turn the adjuster bolt to tighten the tension, and tighten the center nut on the pulley to hold it in place. Yes, you do have a seperate belt for AC, so don't think you are looney. That car has a V-belt to the AC, and a Serp belt for everything else.2000 chrysler concorde 2.7L serpentine belt?
get a repair manual to show you.2000 chrysler concorde 2.7L serpentine belt?
Truthfully, it probably wont matter much because the timing chain will come off of the passenger side and destroy the motor, and the belt will now become the least of your problems. The 2.7 litre engine is...ummm... junk. Sell it now if it still runs.2000 chrysler concorde 2.7L serpentine belt?
ok a seroentine belts drives everything so you do not have a seprate ac belt if you look on the raid support there will be a picture on how the belt goes on aslo go to your local auto parts store like autozopne and they will show you and yes there is a spring loaded tensor2000 chrysler concorde 2.7L serpentine belt?
On all 3.2/3.5 and 2.7 the idler is adjustable-loosen the locknut, then turn the adjuster bolt until proper tension is achieved, then retighten the locknut.

the locknut is on the tensioner the adjuster bolt is right behind the tensioner on the left hand side. Good luck!